The popularity of global LED TVs has led to a shortage of LED chips. The number of MOCVD machines introduced has increased dramatically, and MOCVD has been mass-produced. The demand for MO source (high-purity metal organic source) has increased dramatically in a short period of time, and the shortage of MO source has become one of the most headaches for many LED epitaxial chip companies.
Jiangsu Nanda Optoelectronic Materials Co., Ltd. (hereinafter referred to as “Nanda Optoelectronicsâ€) is currently the only MO source industrialized production enterprise in China, and is also the main provider of MO sources for LED epitaxial chip companies in China. Mr. Lu Baoyuan, vice president of Nanda Optoelectronics, said in an interview with Gaogong LED that the new production line of Nanda Optoelectronics has started production, and the shortage of MO source of LED epitaxial chip companies in China will be better solved next year. Nanda Optoelectronics will provide a solid MO source guarantee for China's LED epitaxial chip companies.
The increase in demand in the industry and the shortage of production capacity have caused a serious shortage of MO source market.
In the past few years, the global MO source market was in an oversupply state, and the market price also fell all the way. The operation status of MO source production enterprises was not satisfactory. At present, the shortage of MO source is mainly caused by two reasons. First, the domestic LED industry has developed rapidly in 2009. Various governments have introduced various support policies, which has led to a particularly rapid increase in demand for LED products and MOCVD machines, thus causing MO sources. The market is short. Second, in 2009, Rohm & Haas, the largest supplier of MO source, was acquired by Dow Chemical Company. At present, Rohm & Haas is in the stage of production reduction and expansion, and the amount of MO source supplied to the market is greatly reduced. This is also the MO on the market. One of the important reasons for the serious shortage of sources.
The MO source technology is complex and the market is difficult to enter.
The MO sources used by LED epitaxial manufacturers are mainly trimethylgallium (TMGa), trimethylindium (TMIn), trimethylaluminum (TMAl), triethylgallium (TEGa) and ferrocene (CP 2 Mg). Different types of products have four main processes: synthesis, purification, analysis, and filling. General manufacturers use synthetic, post-purification, and refill processes. Nanda Optoelectronics adopts a unique control program to test the quality and cylinder mouth of each bottle after filling, to ensure that the factory's MO source is 100% qualified, and completely eliminate the secondary pollution problem during the packaging process.
The technology involved in the MO source is more complicated, and it is not 1-2 technicians can master it, so there is no possibility of new entrants in the market in the short term. Nanda Optoelectronics has more than 20 experienced professional R&D teams to independently develop new products and processes. Nanda Optoelectronics completed a new technological transformation in 2008. At present, the purity of MO source has reached 99.99995%, which is a leading international level.
Nanda Optoelectronics is the only MO source manufacturer in China
The main LED epitaxial chip manufacturers in mainland China are long-term customers of Nanda Optoelectronics, and mainly use the MO source of Nanda Optoelectronics. Nanda Optoelectronics' customers also include multinational companies such as Osram, Philips, UCSB, SOC, LG, Epistar, and ForEpi. It can be seen that the quality of Nanda Optoelectronic MO source products has been recognized by major chip manufacturers on the market.
Use MO source to expand production capacity and small packaging to deal with MOCVD shutdown
Currently, the MO source consumption per MOCVD is 1.2-3kg/month, of which Veeco's 45-piece MO source is about 2.5-3kg/month, and AIXTRON's 31-machine is about 1.5kg/month. In the past, the MO source products of Nanda Optoelectronics mainly used 2.5kg and 4kg large packages. At present, due to the extreme shortage of MO sources, in order to ensure that downstream customers do not stop, most of them use 1kg small package to accelerate the turnover to make more MOCVD. The machine can use MO source products without downtime.
Since 2010, Nanda Optoelectronics has actively expanded its production capacity to cope with the growing market demand through new production lines, technical transformation of existing production lines, process optimization, and enhanced operation management. It is expected that Nanda Optoelectronics' capacity will be expanded to 30 in the next few years. Tonne or so. After November 2010, the needs of most of Nanda Optoelectronics' customers will be met, thus ensuring that the MOCVD machines of Nanda Optoelectronics will not stop production as much as possible.
High-tech LED perspective:
At present, the supply of MO source market in the world is very tight. Many LED epitaxial chip companies have made MOCVD machines in a state of production suspension or semi-production due to the shortage of MO sources. Most of the world's major MO source manufacturers have plans to expand production. As the only MO source industrialization company in mainland China, Nanda Optoelectronics has reached the international advanced level, and its expansion rate is also in a leading position among a limited number of MO source manufacturers. By actively expanding production capacity, it is believed that Nanda Optoelectronics will take the lead in this round of rapid growth in the MO source market.
We also can customize Logo and accroding to your demand products you want. Some design gift is also can be customized. There is nothing we cannot do but something you cannot predict.
Jiangsu Nanda Optoelectronic Materials Co., Ltd. (hereinafter referred to as “Nanda Optoelectronicsâ€) is currently the only MO source industrialized production enterprise in China, and is also the main provider of MO sources for LED epitaxial chip companies in China. Mr. Lu Baoyuan, vice president of Nanda Optoelectronics, said in an interview with Gaogong LED that the new production line of Nanda Optoelectronics has started production, and the shortage of MO source of LED epitaxial chip companies in China will be better solved next year. Nanda Optoelectronics will provide a solid MO source guarantee for China's LED epitaxial chip companies.
The increase in demand in the industry and the shortage of production capacity have caused a serious shortage of MO source market.
In the past few years, the global MO source market was in an oversupply state, and the market price also fell all the way. The operation status of MO source production enterprises was not satisfactory. At present, the shortage of MO source is mainly caused by two reasons. First, the domestic LED industry has developed rapidly in 2009. Various governments have introduced various support policies, which has led to a particularly rapid increase in demand for LED products and MOCVD machines, thus causing MO sources. The market is short. Second, in 2009, Rohm & Haas, the largest supplier of MO source, was acquired by Dow Chemical Company. At present, Rohm & Haas is in the stage of production reduction and expansion, and the amount of MO source supplied to the market is greatly reduced. This is also the MO on the market. One of the important reasons for the serious shortage of sources.
The MO source technology is complex and the market is difficult to enter.
The MO sources used by LED epitaxial manufacturers are mainly trimethylgallium (TMGa), trimethylindium (TMIn), trimethylaluminum (TMAl), triethylgallium (TEGa) and ferrocene (CP 2 Mg). Different types of products have four main processes: synthesis, purification, analysis, and filling. General manufacturers use synthetic, post-purification, and refill processes. Nanda Optoelectronics adopts a unique control program to test the quality and cylinder mouth of each bottle after filling, to ensure that the factory's MO source is 100% qualified, and completely eliminate the secondary pollution problem during the packaging process.
The technology involved in the MO source is more complicated, and it is not 1-2 technicians can master it, so there is no possibility of new entrants in the market in the short term. Nanda Optoelectronics has more than 20 experienced professional R&D teams to independently develop new products and processes. Nanda Optoelectronics completed a new technological transformation in 2008. At present, the purity of MO source has reached 99.99995%, which is a leading international level.
Nanda Optoelectronics is the only MO source manufacturer in China
The main LED epitaxial chip manufacturers in mainland China are long-term customers of Nanda Optoelectronics, and mainly use the MO source of Nanda Optoelectronics. Nanda Optoelectronics' customers also include multinational companies such as Osram, Philips, UCSB, SOC, LG, Epistar, and ForEpi. It can be seen that the quality of Nanda Optoelectronic MO source products has been recognized by major chip manufacturers on the market.
Use MO source to expand production capacity and small packaging to deal with MOCVD shutdown
Currently, the MO source consumption per MOCVD is 1.2-3kg/month, of which Veeco's 45-piece MO source is about 2.5-3kg/month, and AIXTRON's 31-machine is about 1.5kg/month. In the past, the MO source products of Nanda Optoelectronics mainly used 2.5kg and 4kg large packages. At present, due to the extreme shortage of MO sources, in order to ensure that downstream customers do not stop, most of them use 1kg small package to accelerate the turnover to make more MOCVD. The machine can use MO source products without downtime.
Since 2010, Nanda Optoelectronics has actively expanded its production capacity to cope with the growing market demand through new production lines, technical transformation of existing production lines, process optimization, and enhanced operation management. It is expected that Nanda Optoelectronics' capacity will be expanded to 30 in the next few years. Tonne or so. After November 2010, the needs of most of Nanda Optoelectronics' customers will be met, thus ensuring that the MOCVD machines of Nanda Optoelectronics will not stop production as much as possible.
High-tech LED perspective:
At present, the supply of MO source market in the world is very tight. Many LED epitaxial chip companies have made MOCVD machines in a state of production suspension or semi-production due to the shortage of MO sources. Most of the world's major MO source manufacturers have plans to expand production. As the only MO source industrialization company in mainland China, Nanda Optoelectronics has reached the international advanced level, and its expansion rate is also in a leading position among a limited number of MO source manufacturers. By actively expanding production capacity, it is believed that Nanda Optoelectronics will take the lead in this round of rapid growth in the MO source market.
Plastic phone ring holder are mainly made of acrylic material. The ring is made of Zinc alloy. Rotate 360 degree and vertical 180 degree is very convenient. it also can be folded. Fashion and useful. You can use it thousands times.There will be no trace left.Will not be robbed, not sliding, will not fall, sticky strong.
It also called: finger buckle, mobile phone ring, ring bracket, mobile phone holder, 360 bracket, ring frame, mobile phone grip Mobile phone ring frame, iphone mobile phone bracket, ring bracket, finger buckle hook, mobile phone ring bracket, telephone stent.We also can customize Logo and accroding to your demand products you want. Some design gift is also can be customized. There is nothing we cannot do but something you cannot predict.
Plastic Phone Ring Holder
Plastic Phone Ring Holder,Custom Plastic Phone Ring Holder,Promotional Plastic Phone Ring Holder,Plastic Hand Ring Holder For Phone
Dongguan Qilong Electronic Co., Ltd. , http://www.venicen-ringholder.com