The Russian Cattleman Erik Roystan created a "Super Mario" HD panoramic video, mastered the powerful character control skills, crossed the dangers of dense pit people, and stopped playing in the game to see the surrounding environment, let us Let's look at it together.
About Super Mario Bros. Games
"Super Mario Bros." is a famous horizontal game that was developed by Nintendo Co., Ltd. and was produced in 1985. It was first launched on a red-and-white machine and has a number of follow-up works. So far, the combined sales of multiple versions have exceeded 540 million units. At the E3 2013 Nintendo Face-to-face meeting, the official 3D Mario 3D World was released. The game was released on November 21, 2013. The corresponding platform is WiiU.
(Note: "Super Mario" is the erroneous translation name used by Taiwanese pirates. The correct translation should be "Super Mario Brothers.")
HDMI, known as High Definition Multimedia Interface, is mainly used for transmitting HD audio and video signals.
There are three types of data transmitted by HDMI TMDS (plus Hsync and Vsync count as four) :
1.Preamble (control information) is mainly used to control the Data to be transmitted next, namely Data Island or Video Data
2.Data Island, all kinds of packet information, including audio packet, image packet, etc
3.Video Data, Video pixel Data. HDMI can transmit pixel Data in RGB and YUV formats
4. And Hsync and Vsync
HDMI Source device (HDMI HPD) will monitor the Hotplug port of the sink device. If the Hotplug is High, it will prove that the device can work, and then read DCC; if it is low, it will prove that the device is disconnected.
The HDMI Sink device should notify the source device that EDID has been changed by pulling the Hotplug down, and the source device will read the new EDID again after the Hotplug is pulled up, which should be more than 100ms.
HDMI provides that the EDID can be read by DCC when the 5V pin of HDMI is powered on, that is, the Hotplug needs to be high, and some Hotplug is directly connected to the 5V
TMDS Clock is the Pixel Clock, the Clock frequency used for a Pixel point. Through TMDS Clock CLK pins transmitted to the receiver, but the receiver is not clear for what TMDS Clock frequency of the sender sent, so you need to through the Phy (Phy is analog to digital conversion section, is different from the ADC, Phy is don't know the sampling frequency, the need to lock frequency and phase lock, detect the exact input frequency) to lock.
Pc Hdmi Input,Hdmi Input Adapter,Hdmi Input Splitter,Hdmi Port On Tv
Tonya Display Limited , https://www.tydisplay.com