At present, the City Greening City Appearance Bureau and various districts and counties have established information systems for the treatment of domestic waste, but there is no correlation between the systems and the systems, which are relatively dispersed and not within a unified framework system. Each system only focuses on a certain link in the domestic waste logistics, or a certain area, and does not manage the whole process of domestic waste disposal in the city.
Relevant logistics data has been collected, but it is not fully covered, and the data cannot be reflected in real time.
The data related to logistics include weight and route. Since the transportation route of domestic garbage is relatively fixed, the weighing data of domestic garbage is an important data to be mastered in the management of domestic garbage logistics. Currently, 36 measurement points are installed in Shanghai, including 21 measurement points for the municipal solid waste weighing system and 15 measurement points for districts and counties. 36 measurement points, including 13 disposal points, 8 terminals and 15 transfer stations. Domestic garbage weighing data is currently submitted the next day, not in real time.
Business process analysis and optimization plan
Existing business process
The existing business processes include information flow, capital flow and logistics flow. The entire business flow includes such objects as the City Greening City Appearance Bureau, District Greening City Appearance Bureau, environmental sanitation operation company, weighing operation company, transfer station operation company and disposal site.
New business process to be realized after construction of information system
After the construction of the information system, two key nodes, the settlement center and the monitoring and command center, were added on the original basis to change the business process of capital flow and logistics. The settlement center integrates the original decentralized fund management, and the settlement center distributes it uniformly, thereby effectively improving the shortcomings of the previous fund flow process. The monitoring and command center will uniformly schedule the municipal solid waste disposal in the city, unify the originally scattered resources through the monitoring and command center, rationally allocate and use them, and optimize the original business process.
operating system
The application system includes a command center and six functional modules: dynamic logistics balance management, transshipment and disposal process management, scheduling model and dynamic cost analysis, statistical analysis and auxiliary decision-making, expense settlement management, and logistics transshipment vehicle process monitoring.
ANTENK are a leader in the design, worldwide manufacture, and marketing of Solder Cup Power D-Sub miniature, D-Sub connectors designed for applications that require a rugged / robust I/O connector system.The Antenk POWER-D & Combo-D mixed contact d-sub connectors solder type are designed for rugged / robust applications where both power & signal are required from a single connection. Featuring [Solid-Pin" machined contacts, these connectors offer high reliability performance. These products are used in nearly all application markets, from control and measuring to telecommunications and computer applications. Owing to the combination of various contact types there are numerous possibilities of saving installation space and costs in the interface area. Antenk Power D solder cup connectors have a metal shell in both the plug and socket versions as well as stamped contacts with tin/lead in the solder cup area. They offers ease of termination and reliability.
ANTENK POWER SOLDER CUP D-SUB CONNECTOR
Select from a full range of premium cable mount Solder Cup D-Sub Connectors in standard & high density pin positions with either stamped or machined contacts.
ANTENK SOLDER CUP D-SUB MIXED CONTACT | MACHINED FEATURES
D-Sub Mixed Contact Connectors in 12 industry standard contact configurations: 3W3 | 3W3K | 5W1 | 5W5 | 7W2 | 8W8 | 9W4 | 11W1 | 13W3 | 13W6 | 17W2 | 21W1 | 21WA4
Available with 20 or 40 amp power contacts, 5 amp signal.
Allows signal, high current & high voltage in one connector.
Contacts are pre-loaded into the insulator.
ANTENK SOLDER CUP D-SUB MIXED CONTACT MATERIALS
Shell: Steel, nickel plated
Insulator: Glass-Filled Thermoplastic, U.L. 94V-O, Black
D-Sub Mixed Signal Contacts: Machined Copper Alloy, Full Gold Flash
D-Sub Mixed Power Contacts: Machined Copper Alloy, Full Gold Flash
Solder Cup Power D-Sub Connector
Combo Power D-sub Connectors,Power D solder cup connectors, High Current D Sub Connector solder type, POWER-D Mixed Contact Connectors,Combo D-sub Connectors
ShenZhen Antenk Electronics Co,Ltd , https://www.antenk.com