The composition and operation principle of CRT character display

The composition and operation principle of CRT character display

The core component of the CRT display is its cathode ray tube. After introducing the composition and operating principle of the cathode ray tube, the other components of the CRT display will be explained next. For the character display, it is the scan control logic, display memory and character generator, which use various digital circuits. Achieved. The monitor, display memory and character generator used in the PC are placed on the display card inserted in the host computer, and the terminal used in the small computer supporting the multi-user system is scanned for control logic, display memory and character generator All are placed in the controller of the terminal device itself.

The movement of the electron beam on the display screen according to a certain trajectory is called scanning, and the circuit that controls the trajectory of the electron beam is called the scan control logic component. Common scanning methods include raster scan (Raster Scan) and random scan (Random Scan). Species, the performance and price of the two are quite different.

In the raster scan mode, the electron beam scans the entire screen from left to right and from top to bottom. The scan control itself does not need to distinguish what position is to be displayed and what point is not displayed. It only controls the electron beam on the entire screen Move repeatedly on the screen, and the specific content displayed is provided through another logic circuit. In this scanning mode, there are two schemes: progressive scanning and interlaced scanning. Progressive scanning starts from the top of the screen and sequentially scans all the lines in sequence (the line here refers to the line formed by dots in the dot matrix) , Interlaced scanning is to scan all lines with odd line numbers this time, and scan all lines with even line numbers next time. Interlaced scanning is commonly used in television. Because the raster scan and the TV system use the same technology, the technology is mature, the product is cheap, and it is widely used in computer monitors. Its disadvantage is that it has more scanning redundancy time and lower resolution, so it is mainly used for popular character displays.

In the random scanning mode, the electron beam only scans the position on the screen where the content is displayed, rather than the entire screen. Therefore, this scanning mode has a fast drawing speed and high resolution, so it is mainly used for high-quality graphic displays. The disadvantage is that its scanning control logic is more dedicated and complicated, the product production volume is not large enough, and the price is relatively high.

Electronic design is also trying to reduce its size while continuously improving the performance of the whole machine. From mobile phones to smart small portable products, small is always the same pursuit. High-density integration (HDI) technology enables end-product design to be more compact while meeting higher standards of electronic performance and efficiency. HDI is currently widely used in mobile phones, digital (camera) cameras, MP3, MP4, notebook computers, automotive electronics and other digital products, among which mobile phones are the most widely used. HDI boards are generally manufactured using a build-up method. The more times the layers are stacked, the higher the technical grade of the board. Ordinary HDI boards are basically one-time laminate, high-order HDI uses two or more layers of technology, and adopts advanced PCB technology such as stacking holes, plating holes, and laser direct drilling. High-end HDI boards are mainly used in 3G mobile phones, advanced digital video cameras, IC carrier boards, etc.

HDI PCB

Pcb Hdi,Hdi Board,Hdi Pcb Design,Hdi Pcb Technology

Chuangying Electronics Co.,Ltd , https://www.cwpcb.com