Stone Wear Testing Machine
YSD-11 Model
One,
Stone Wear Testing Machine
Application Scope:
This testing machine is designed to evaluate the wear resistance of stone materials used as flooring or in similar applications. It meets the requirements of the GB/T 19766-2005 standard, ensuring accurate and reliable results for quality control purposes.
Two,
Stone Wear Testing Machine
Test Requirements:
Each test group consists of four samples. The dimensions should be: length and width of 50 mm ± 0.5 mm, and thickness ranging from 15 mm to 55 mm. The edges of the samples must be rounded with a radius of approximately 0.8 mm to ensure uniform wear during testing.
Before testing, samples should be dried in an electric oven at 105°C ± 2°C and then cooled to room temperature before being placed into the abrasion testing machine.
Three,
Stone Wear Testing Machine
Testing Method:
1. Dry the samples to a precision of 0.02g, then place them in the abrasion testing machine according to GB/T 2479-1996 specifications. Use white corundum particles of 0.25mm size as abrasive material. Perform the test at 225 rpm on the grinding disc, remove the sample, brush off any dust, and reweigh it to 0.02g.
2. Immerse the sample in water for 1 hour, then dry it with a damp cloth and weigh it again. Calculate the bulk density following GB/T 9966.3-2001. Since humidity can affect the abrasion performance—higher humidity may increase the wear rate—it is recommended that tests be conducted at a relative humidity of (30–40)% for consistent results.
Four,
Stone Wear Testing Machine
After completing the test, clean the surface thoroughly and cover the machine with a dust cover to protect it from contamination and damage.
Stone Wear Testing Machine Display Image: 
Spring-type terminals are new types of spring-type terminals, which have been widely used in the world's electrical and electronic engineering industries: lighting, elevator control, instrumentation, power, chemistry, and automotive power.
If the terminal block is black, one of the possibilities is not necessarily burning black, oxidation may also be black. So how to verify whether it is burnt black? The method we take is to wipe it with a finger. If it can be wiped off, like soot, it is the black substance formed by oxidation, which can only be ground off with sandpaper or a file.
Spring Terminal,Spring Push-In Terminal Block,Spring Clamp Terminal Block,Spring Terminal Block For Pcb
Sichuan Xinlian electronic science and technology Company , https://www.sztmlch.com