Hello everyone, I finished writing the bills a few days ago. Today, I went to a fun thing and I brought it to the sun. It was also the first sun. However, there is one point that I must change the product for experimental evaluation only. I can't do it illegally. thing. . . .
First briefly introduce this thing: Proxmark3 is an open source hardware designed and developed by Jonathan Westhues. It mainly uses RFID for snooping, reading, and cloning of changes and writes. Supported card types basically design all ic id uid hid etc. And so on, including the bus cards, access control cards, meal cards, social insurance cards, water cards, school supermarket cards, hot water cards, etc. that we currently use.
Here once again to remind everyone, do not use the goods to do illegal things, just do tests, their own hobby research and other operations.
Well, let's make a blueprint
Express packaging has been torn off. . .
Express packaging has been torn off. . .
Various types of cards, as well as data lines, fuselage
Various types of cards, as well as data lines, fuselage
Two uid cards, three cuid cards, one s50 card, one hid card, two T5577 cards
Two uid cards, three cuid cards, one s50 card, one hid card, two T5577 cards
The data line is good and very thick.
The data line is good and very thick.
HID card
HID card
Front view
Front view
One-time unsealing, in fact, hot air can also be opened without a trace.
One-time unsealing, in fact, hot air can also be opened without a trace.
Open, this body.
Open, this body.
This is below the IC high-frequency card reader area
This is below the IC high-frequency card reader area
Equipped with screws and a small screwdriver, very hard, as well as ID card low-frequency card reader area.
Equipped with screws and a small screwdriver, very hard, as well as ID card low-frequency card reader area.
Two cards front
Two cards front
The card uses a full-PCB gold-immersed process, with flat pads and regular placement.
The card uses a full-PCB gold-immersed process, with flat pads and regular placement.
Two backs
Two backs
ID coil reader area
ID coil reader area
Screws, very structured.
Screws, very structured.
Small screwdriver.
Small screwdriver.
Screws
Screws
Behind the low frequency card coil.
Behind the low frequency card coil.
Already installed.
Already installed.
On the back, there are stickers already affixed, think very thoughtful
On the back, there are stickers already affixed, think very thoughtful
Plug in, blue light.
Plug in, blue light.
On the machine, test, open the software, drive, set up com2 mouth.
On the machine, test, open the software, drive, set up com2 mouth.
Put the access control card key chain to read the card directly
Put the access control card key chain to read the card directly
A total of 16 sectors, 4 blocks per sector, all without encryption.
A total of 16 sectors, 4 blocks per sector, all without encryption.
Where to buy
Lynx Box M13
Installation Guide>>Huawei Glory Box Pro
Installation Guide>>Millet box 3
Installation Guide>>Infinik i9
Installation Guide>>KKTV
Installation Guide>>Letv TV S50 Air
Installation Guide>>AC Contactor switch mainly used for making or breaking circuit at a long distance, suitable for controlling starting\stopping\reversing of AC motor. AC Contactor of korlen conforms to the requirement of IEC60947-4-1& GB14048.4 standards.
Except AC Contactor, there are many different types of low voltage electric appliances, such as Thermal Relay,Manual Motor Startor ,led light, Circuit Breaker, etc.
AC Contactor,Magnetic Contactor,Wafer Style Valve
Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.zjaccontactor.com
Pro, you need to login to comment!