I asked a practical question, Apple's headphones , data lines with a long time turned black and yellow, how can we let him come back without breaking? I believe many people are entangled!
Indeed, I believe many of my friends will encounter such problems. Many mobile phone headsets use white designs to highlight the traits of fashion. Although white headphones do attract many pedestrian attention, they are also like brand-name backpacks. Difficult to clean, it will inevitably become black and yellow after a long time, and how to make it maintain its character has become a headache for many people. In fact, pure talk of cleanliness, if you do not consider the earphone material and wire structure, we should be able to come up with countless kinds of clean methods, but I believe that many people should have had this experience, that is, after cleaning some of the headphone cord, the total headphone There will be situations where the lines are hardened, poorly contacted or completely broken. This is mostly because the methods used by everyone are not allowed to be caused.
So, when you clean the headphones, can you keep the headphones from being damaged? First of all, we must first understand the weakness of the headset.
The weakness of headphones
When it comes to weakness, the first thing to say is naturally its fragile wire. The wire of the headset is just as fragile as the baby's skin. To ensure simplicity and flexibility, the wires of the headset are often wrapped in thin rubber. Planing the skin exposes the copper directly. So, unless your headphone wire is made of indestructible Kevlar fibers, a friend who wants to wipe hard with a rag will take a break. This method is obviously not suitable for cleaning ordinary headphones. Then, since it cannot be used, it naturally limits the method of cleaning.
In addition, another major weakness of the headset is its ability to resist corrosion. Most headphones that need to be cleaned are in the white category. White is both love and hate. If we can avoid the white headphones, the possibility of getting dirty will be greatly reduced. At the same time, another major drawback of white headphones is that they turn yellow. This is mainly due to the corrosiveness of sweat that is secreted by humans. In addition, due to the surrounding environment, white wire will oxidize and turn yellow after a certain period of time. After yellowing, it is almost impossible to restore. Speaking of a friend who may be here may think of bleach, don't be silly, it is corrosive.
One question and answer: How do you clean the white headphone cord after it turns yellow?
The choice of cleaning methods
Understand the weakness of the headset, we can be targeted on the cleaning methods and tools to determine, first of all we can determine the following points.
1. Select a corrosive cleaning solution
Speaking of corrosiveness, many friends may think of water, but for those who have been stained with stubborn stains, the effect of direct water rubbing must not be too good, so it requires a reliable cleaning agent. Similar to non-abrasive toothpaste is a good choice, just squeeze a little bit of toothpaste, mix a small amount of water, then gently wipe with a small amount of cotton cloth, and finally dry with a dry towel, this operation can minimize the loss Under the premise of cleaning headphones. In addition, you can also choose soap water, take a small piece of soap, melt with warm water, then use a small amount of solution in the war zone to wipe the headphone cable, and then dry with a dry towel, of course, if conditions permit, you can put the headset In dry and clean rice for several hours.
It is worth mentioning that there have been many previous posts recommending the use of alcohol, wipes and white vinegar to clean the headphone cords. In terms of effect, they may have a good cleaning performance, but alcohol and wet wipes tend to make the wires harder and harder. The taste of white vinegar is too large and the method is too extreme. Xiaobian is strongly not recommended here.
2. Do not use excessive force when cleaning the wire
After selecting the "cleansing agent," the next step is to clean it. Actually speaking, there aren't many tricks. Just keep in mind one thing, that is, don't use too much effort, because the headset cable is very fragile and oversized. The force will directly exceed the stretch limit of the wire itself, which is like a rubber band is broken. Losing the elasticity of the wire skin also loses the function of protecting the internal wire. We only need to wipe gently, no need to spend too much effort.
3. Avoid too frequent cleaning
We know that when buying a headset, the official will not always provide a method of cleaning the headset. This is actually a certain reason, because every wash even if the water will damage the wire, so we should also maintain a The principle of cleaning is that if the headphones are not very dirty, try not to wash them. Frequent cleaning of wire must be overkill. It should be noted that most earphones have not considered the problem of cleanliness at the beginning of design.
Since cleaning headphones have such limitations or restrictions, and after cleaning, they should not be a temporary solution. We should pay more attention to the maintenance of headphones during daily use, such as paying attention to the way the headphones are worn, and avoid direct contact between the headphones and the skin. Sweat is a headphone cable. Most of the enemies, most of the wire oxidation is due to long-term contact with the skin, we wear headphones, it is best to clip the wire on the collar, slow down the process of oxidation of the wire.
In addition, we should also pay attention to keeping the headphones dry all the time. Wet air is also the enemy of the headphones. Moisture in the air will make the unit moldy and the wire oxidize, especially for HiFi headphones. Often we neglected to maintain it, and then use it for a long time to find that the unit or wire has been damaged. Therefore, we usually use the headphones, it is best to be placed in the packaging, if conditions permit, you can add desiccant in the packaging, which will have a very good effect on the maintenance of the headset. Compared to the headset cleaning method, the maintenance method is simple and effective.
Finally, if the headphones in your hands are really unrepairable, and trying the above methods still can't restore them to the original, you may wish to relax your mind. After all, it's just a headset. Maybe it's worth the price. Perhaps It accompanies you for a long time, but you have to know that the headset is a consumable product to some extent, it has a longevity, if the headset can still be used, just dirty, we might as well change the idea for the headset cable Do something creative DIY, which is enough to allow it to continue its style after fading.
For more information, headset business opportunities, headset purchase, please pay attention to China Headset Trading Network: [/], welcome to use free trial membership trial, contact information