The Huawei EC6108v8 version donated by Shaanxi Telecom is ineffective when installed with various methods on the Internet. The ttl Brush Tutorials issued by the top two friends in the forum are too general. I took a long time to get this box.
Now let's put detailed tutorials in order to make more people go less detours.
At present, Shaanxi Telecom version EC6108v8 has two ways to crack:
1. Taobao search for cracked people, charges 50, may be resolved by remote update method. If you are eager to crack, you do not want to choose this one yourself.
2. Shaanxi Telecom EC6108v8 can only install third-party software through TTL line brush to achieve this breakthrough. If you have a better way to install third-party software on the Shaanxi Telecom version through TTL, please share it out. TTL This part can be saved.
TTL Brush Method:
1. Taobao to buy usb to TTL line: http://item.taobao.com/item.htm? ... 926979&_u=cd4jib07d 8.5 yuan also sent the cable, in this connection is to let you save shopping Taobao time.
2. Remove the ec6108. Method: Knock off the front two rubber pads. There are two screws inside. Turn it off and open the cover from the side of the set top box. The disassembly will not affect the appearance and will not damage the label, so it will not affect the warranty. .
3 set-top box connector method:
01. The connection cable can be used to distinguish the needle, straighten the connection, or use the thin wire inside the cable to pull out the connection. In short, you think that a good method is not welding, and the connection can be stable.
02. Install usb to TTL driver (provided by Taobao sellers), open the HyperTerminal (the last piece of software has a unified download of the software) to create a new connection, select the USB port from the USB port to the com port of the USB port.
03. The set-top box is powered on. At the same time, the box startup data is displayed on the HyperTerminal. If it is not displayed, check whether the connection cable is correct and in good contact. See if it is RX, TX line is reversed. (The two line alignments will not burn out)
4. After the STB starts up, press Enter in the HyperTerminal and enter start adbd
5. Put the adb folder in the root directory of drive C, enter CMD, and use the dos command to enter the adb folder.
Adb connect "box ip" // connect to the box
Adb install "apk path" //install apk into the box
Tip: View the box ip method: press the governor settings, enter the network settings, you can use the wireless wifi connection, select the wireless connection where you can see the box's ip address. The // above is a comment, don't have to type it.
You can first install a sofa desktop and Baidu root is enough.
Then restart the box and press and hold the remote control's "Back" button to enter the sofa table. This step can be a milestone, because smart you already know how to install the software, how to watch the video. At the same time can retain the original iptv function. If you want to brush the box completely and become a commercial box, please continue to look down.
Brush tutorial:
1. Open Baidu ROOT, Note: The box must be inserted inside the TF card, so that Baidu can be root success, many tutorials will not be this point to indicate, causing me to toss this for an hour.
2. Baidu root successfully installed in the box sshdirod and ES file browser or RE file browser (you can first install the sofa butler has downloaded), run sshdirod on the box (with the mouse), the annoying prompt point ok After writing down the IP address and port number
3. Install and run SecureCRT on your computer
If the connection is prompted for a username: root Password: admin
Then type the following command
Mkdir /tmp/ii //Create a folder in the tmp directory ii
Su // Get su permission
Mount -t ext3 /dev/block/platform/hi_mci.1/by-name/backup /tmp/ii //Map the backup partition to directory ii
Tip: You can copy the above command line by line to run / / followed by a note, do not copy
At this point on the box you use the file manager to open the ii directory, you should see the update.zip file, this is your box's original firmware, you can back it up.
4. Copy the Jingdong white box firmware into the tf card or u disk. Copy and replace the update.zip in the tmp/ii folder with the file manager on the box.
5. The box power button is turned off, and then press the power button on the remote control continuously while holding the power button. Enter the box's recovery, use the remote control to select the second item, restore the system firmware, the box will brush the third-party rom that we just replaced in the past, when you turn on the power again, you have already seen the pleasant picture.
The above command hopes that a master can integrate a batch file for everyone's convenience.
All programs mentioned above are downloaded: http://pan.baidu.com/s/1mg288Fu
Free automatic upgrade method using the file manager, enter the /system/app permission to read and write, delete the UpgradeOnline.apk file
Now let's put detailed tutorials in order to make more people go less detours.
At present, Shaanxi Telecom version EC6108v8 has two ways to crack:
1. Taobao search for cracked people, charges 50, may be resolved by remote update method. If you are eager to crack, you do not want to choose this one yourself.
2. Shaanxi Telecom EC6108v8 can only install third-party software through TTL line brush to achieve this breakthrough. If you have a better way to install third-party software on the Shaanxi Telecom version through TTL, please share it out. TTL This part can be saved.
TTL Brush Method:
1. Taobao to buy usb to TTL line: http://item.taobao.com/item.htm? ... 926979&_u=cd4jib07d 8.5 yuan also sent the cable, in this connection is to let you save shopping Taobao time.
2. Remove the ec6108. Method: Knock off the front two rubber pads. There are two screws inside. Turn it off and open the cover from the side of the set top box. The disassembly will not affect the appearance and will not damage the label, so it will not affect the warranty. .
3 set-top box connector method:
01. The connection cable can be used to distinguish the needle, straighten the connection, or use the thin wire inside the cable to pull out the connection. In short, you think that a good method is not welding, and the connection can be stable.
02. Install usb to TTL driver (provided by Taobao sellers), open the HyperTerminal (the last piece of software has a unified download of the software) to create a new connection, select the USB port from the USB port to the com port of the USB port.
03. The set-top box is powered on. At the same time, the box startup data is displayed on the HyperTerminal. If it is not displayed, check whether the connection cable is correct and in good contact. See if it is RX, TX line is reversed. (The two line alignments will not burn out)
4. After the STB starts up, press Enter in the HyperTerminal and enter start adbd
5. Put the adb folder in the root directory of drive C, enter CMD, and use the dos command to enter the adb folder.
Adb connect "box ip" // connect to the box
Adb install "apk path" //install apk into the box
Tip: View the box ip method: press the governor settings, enter the network settings, you can use the wireless wifi connection, select the wireless connection where you can see the box's ip address. The // above is a comment, don't have to type it.
You can first install a sofa desktop and Baidu root is enough.
Then restart the box and press and hold the remote control's "Back" button to enter the sofa table. This step can be a milestone, because smart you already know how to install the software, how to watch the video. At the same time can retain the original iptv function. If you want to brush the box completely and become a commercial box, please continue to look down.
Brush tutorial:
1. Open Baidu ROOT, Note: The box must be inserted inside the TF card, so that Baidu can be root success, many tutorials will not be this point to indicate, causing me to toss this for an hour.
2. Baidu root successfully installed in the box sshdirod and ES file browser or RE file browser (you can first install the sofa butler has downloaded), run sshdirod on the box (with the mouse), the annoying prompt point ok After writing down the IP address and port number
3. Install and run SecureCRT on your computer
If the connection is prompted for a username: root Password: admin
Then type the following command
Mkdir /tmp/ii //Create a folder in the tmp directory ii
Su // Get su permission
Mount -t ext3 /dev/block/platform/hi_mci.1/by-name/backup /tmp/ii //Map the backup partition to directory ii
Tip: You can copy the above command line by line to run / / followed by a note, do not copy
At this point on the box you use the file manager to open the ii directory, you should see the update.zip file, this is your box's original firmware, you can back it up.
4. Copy the Jingdong white box firmware into the tf card or u disk. Copy and replace the update.zip in the tmp/ii folder with the file manager on the box.
5. The box power button is turned off, and then press the power button on the remote control continuously while holding the power button. Enter the box's recovery, use the remote control to select the second item, restore the system firmware, the box will brush the third-party rom that we just replaced in the past, when you turn on the power again, you have already seen the pleasant picture.
The above command hopes that a master can integrate a batch file for everyone's convenience.
All programs mentioned above are downloaded: http://pan.baidu.com/s/1mg288Fu
Free automatic upgrade method using the file manager, enter the /system/app permission to read and write, delete the UpgradeOnline.apk file